Necchi Sewing Machine Troubleshooting

It is very common for Necchi sewing machines to develop technical problems and stop working.

If you are not a technical person, you will be clueless and have no idea how to make the machine work again.

But don’t worry, we will show you the light. Down there is a descriptive list of all the Necchi sewing machine problems, their causes, and their solutions. Just find the problem you are facing, follow the solution steps, and make your sewing machine work again.

The upper thread of Necchi sewing machine keeps breaking

Causes of problem:

There are 6 possible reasons why the upper thread of your Necchi sewing machine keeps breaking:

1. The thread tension is too high.
2. The sewing needle is damaged.
3. The sewing needle is not correctly installed into the machine.
4. You have not threaded the sewing machine properly.
5. The thread you are using is too thick for the current needle installed in your machine.
6. The spool holder pin has a thread around it.

Solution:

Here are the solutions to the problems described above:

1. If the thread tension is too high, reduce it to avoid thread breakage.
2. Replace the needle if it is damaged.
3. Make sure you have correctly installed the needle.
4. Make sure you have threaded the sewing machine correctly.
5. If the thread is too thick for your needle, use a larger-sized needle.
6. Remove the reel and then wind up the thread on it.

The bobbin thread of Necchi sewing machines keeps breaking

Causes of problem:

Here are the 2 possible causes:

1. You have not inserted the bobbin case correctly which leads to the breakage of the bobbin thread.
2. You have not threaded the bobbin case correctly. That’s why the thread keeps breaking.

Solution:

1. Remove the bobbin case and insert it again correctly.
2. Make sure that the bobbin case and the bobbin are in the correct position.

The sewing machine keeps skipping stitches

Causes of problem:

Here are the 5 major reasons why your sewing machine is missing stitches:

1. You have not threaded the sewing machine correctly.
2. The needle of your sewing machine is damaged.
3. The needle of your machine is not installed correctly.
4. You are using the wrong-sized needle.
5. The presser foot is not connected properly.

Solution:

1. Make sure to thread the sewing machine properly.
2. Make sure the needle of your machine is not damaged. If it is, then replace the needle.
3. Check if you have installed the needle the right way.
4. The size of the needle should be suitable for the thread you are using.
5. Check and make sure that the presser foot is correctly attached to the sewing machine.

The needle of the Necchi sewing machines keeps breaking

Causes of the problem:

There are 7 possible reasons why the needle of your Necchi sewing machine breaks frequently:

1. You are using a damaged needle.
2. You have not installed the needle correctly.
3. You are using the wrong size of needle for the fabric you are sewing.
4. You have attached the wrong presser foot to the machine.
5. The needle clamp screw of your sewing machine is too loose.
6. The presser foot you are currently using is not suitable for the type of stitches you want to make.
7. The upper thread tension is too high.

Solution:

1. Replace the needle if it is damaged.
2. The needle must be correctly installed into the machine.
3. Make sure to use the right size & type of needle for the fabric you are sewing. For example, if you are sewing a thick fabric but using a light needle, it is bound to break.
4. Make sure you have installed the right presser foot on the machine.
5. Tighten the needle clamp screw if it is too loose.
6. Use the right presser foot for the type of stitches you want to make.
7. Reduce the upper thread tension if it is too high.

The Necchi sewing machines is making loose stitches

Causes of the error:

There could be 4 possible reasons why the Necchi sewing machine is making loose stitches on the fabric:

1. You have not threaded the machine correctly.
2. You have not threaded the bobbin case correctly.
3. You are using the wrong needle.
4. The thread tension is not correct.

Solution:

1. Make sure you have threaded the sewing machine properly.
2. Make sure you have threaded the bobbin case correctly.
3. The size of your needle should be suitable for the thread and fabric you are working with.
4. The thread tension should be appropriate.

The seam is gathering or puckering

Causes of problem:

1. You are using a very thick needle for the fabric you are sewing.
2. The stitch length you have set is incorrect.
3. The thread tension is very high.
4. You are sewing a thin fabric.
5. The needle is not threaded correctly.

Solution:

1. Use the right size of needle that best suits the fabric you are sewing.
2. Adjusting the stitch length can help prevent seam gathering or puckering.
3. Decrease the thread tension if it is too high.
4. If you are sewing on a thin fabric, place some stabilizer material under the fabric to avoid puckering.
5. Make sure the needle is threaded properly.

The Necchi sewing machines is making distorted stitches

Causes of problem:

1. You are using the wrong presser foot for the stitch.
2. The needle thread tension is very high.

Solution:

1. Use the right presser foot for the stitch.
2. Reduce the thread tension.

The thread is jammed

Causes of problem:

The thread of a sewing machine gets jammed when it is caught in the hook or when the feed dogs are clogged with lint.

Solution:

Remove the upper thread and then remove the bobbin case. Now rotate the handwheel back and forth and remove any remnants of the thread.

After that, thread your sewing machine again.

The Necchi sewing machines is making a lot of noises

Causes of problem:

1. You are using a damaged needle and it is creating those noises.
2. Feed dogs are full of dirt and lint.
3. There is a lot of oil or fluff accumulated on the needle bar or the hook.
4. The thread is trapped in feed dogs or the hook of the machine.

Solution:

1. If your needle is damaged, change it and all the noises will be gone.
2. Clean the feed dogs and hook of your sewing machine. This will ensure the smooth and silent working of the machine.
3. Remove the bobbin case and the upper thread. Rotate the handwheel back and forth. Then, remove any thread trapped in there.

The Necchi sewing machines is making uneven stitches

Causes of problem:

There are 3 reasons why you are getting uneven stitches:

1. You are using a poor-quality thread.
2. You have not threaded the bobbin case correctly.
3. The fabric is being pulled while sewing.

Solution:

1. Always use a high-quality thread.
2. Remove the bobbin case, rethread it, and then reinsert it into the machine.
3. Avoid pulling the fabric while sewing. It will prevent uneven stitches.

The Necchi sewing machine is not working

Causes of problem:

If your sewing machine is not operating, the following are the reasons behind it:

1. The machine is not powered ON.
2. The presser foot is rasied.

Solution:

1. Make sure the power cord of your sewing machine is plugged into the electric outlet and it is powered ON.
2. If the presser foot is raised, lower it to make the sewing machine work.

Necchi sewing machine starts sewing on its own when powered ON

Causes of the error:

If your sewing machine starts running automatically once plugged in, it means that the foot pedal is dirty from the inside.

Another reason could be that the foot pedal has malfunctioned and needs replacing.

Solution:

Thoroughly clean the foot pedal from the inside. If that does not work, try replacing the foot pedal.

The stitch selector is not moving

Causes of the error:

The stitch selector stops moving due to poor lubrication or when it is broken.

Solution:

Oil your sewing machine as per the requirements. It will reduce friction and help the stitch selector move.

If that does not work, see if any part of the stitch selector is broken. If yes, fix or replace it.

The handwheel does not move the needle

Causes of problem:

If the handwheel of your machine does not move the needle, it might be due to the accumulation of lint and dust or lack of lubrication in the machine.

Otherwise, the screw of the needle bar has loosened up or the take-up lever has broken.

Solution:

Deep clean your sewing machine and remove all the lint and dust trapped inside it.

Lubricate all the important parts of the machine as per the requirements.

If the needle bar screw is loose, fix it. If any part is broken, replace it.

The Necchi sewing machine does not stop running

Causes of problem:

If your sewing machine does not stop running, it means there is a short circuit in the machine or the power cord.

Solution:

Get your sewing machine checked thoroughly by a professional technician.